A Step-by-Step Guide for Minimizing Reagent Quantities and Treatment Costs

Superabsorbent polymers (SAPs) are the most efficient available technology for eliminating free liquid and stabilizing saturated coal ash.  However, without the proper planning steps, SAPs can be severely over-applied which often leads to unexpected treatment costs and/or underperformance.   

The following steps are critical for the successful stabilization of coal ash with superabsorbent polymers: 

Rainy weather is often the last thing anyone wants to see on the forecast, whether your plans involve a round of 18, a day out on the boat, or a power plant CCR basin closure.  

Water, while vital for life, can be an expensive nuisance when it comes at the wrong time and place.

For electric power utilities, closing a CCR basin during rainy season often result in the following scenarios:

• Missed deadlines
• Excessive chemical expenses, and
• Over-budget labor due to out-of-scope ash drying.

Superabsorbent polymers (SAPs) are a key technology for safe, fast, and efficient stabilization of wet and saturated coal combustion residuals (CCR), a major waste management challenge for electric power utilities in the US. Traditional pozzolanic stabilization reagents, such as quicklime, lime kiln dust (LKD), and Portland cement, often perform inadequately with CCR material that is heavily layered, unusually difficult to dewater, or when operating in excessively wet weather conditions. However, the introduction of small dosage rates of SAPs (0.3%-1.0%), either as a standalone technology or as a component of a pozzolan blend, provides CCR management contractors a modern tool for reliable and predictable CCR drying.